Stormwater sediments of various sizes and densities are recognised as one of the most important stormwater quality parameters that can be conventionally controlled by settling in detention ponds. The bottom grid structure (BGS) is an innovative concept proposed in this study to enhance removal of stormwater sediments entering ponds and reduce sediment resuspension. This concept was studied in a hydraulic scale model with the objective of elucidating the effects of the BGS geometry on stormwater sediment trapping. Towards this end, the BGS cell size and depth, and the cell cross-wall angle were varied for a range of flow rates, and the sediment trapping efficiency was measured in the model. The main value of the observed sediment trapping efficiencies, in the range from 13 to 55%, was a comparative assessment of various BGS designs. In general, larger cells (footprint 10 × 10 cm) were more effective than the smaller cells (5 × 5 cm), the cell depth exerted small influence on sediment trapping, and the cells with inclined cross-walls proved more effective in sediment trapping than the vertical cross-walls. However, the BGS with inclined cross-walls would be harder to maintain. Future studies should address an optimal cell design and testing in an actual stormwater pond.