Influence of geometry and annealing temperature in argon atmosphere of TiO2 nanotubes on their electrochemical properties

Acta Bioeng Biomech. 2020;22(1):165-177.

Abstract

Purpose: In this paper, electrochemical properties of the as-formed and thermally treated titanium dioxide (TiO2) nanotubes with diameter in the range of 20-100 nm and height in the range of 100-1000 nm were presented. In addition, the effects of annealing temperature (450-550 °C) on the electrochemical characteristics of these structures, as well as the influence of diameter and height of TiO2 nanotubes on these properties were examined. The results were referred to a compact TiO2 layer (100 nm thick).

Methods: The electrochemical test included open circuit potential, impedance spectroscopy and cyclic voltammetry measurements. The scanning electron microscope with energy dispersive spectroscopy analyser, x-ray photoelectron spectroscopy, and x-ray diffraction analysers were used for surface morphology characterisation as well as elemental, phase and chemical composition of TiO2 layers.

Results: It was found that nanotubes with the diameter of 50 and 75 nm (height of 1000 nm) annealed at 550 °C exhibit the lowest impedance and phase angle values. However, the voltammetric detection of potassium ferricyanide indicated that the closest to 1 Ipc /Ipa ratio were shown by nanotubes with a diameter of 50 and 75 nm annealed at 450 °C.

Conclusions: On the basis of performed analysis, it can be stated that the TiO2 layer with nanotubes of 50 nm in diameter and of 1000 nm in height, annealed in 450 °C may be indicated as the ones having the most favourable sensing and biosensing properties.

MeSH terms

  • Argon / chemistry*
  • Electric Impedance
  • Electrochemistry*
  • Electrodes
  • Nanotubes / chemistry*
  • Photoelectron Spectroscopy
  • Spectrometry, X-Ray Emission
  • Temperature*
  • Titanium / chemistry*
  • X-Ray Diffraction

Substances

  • titanium dioxide
  • Argon
  • Titanium