Facile magnetic biochar production route with new goethite nanoparticle precursor

Divine Damertey Sewu; Hai Nguyen Tran; Godfred Ohemeng-Boahen; Seung Han Woo

doi:10.1016/j.scitotenv.2020.137091

Facile magnetic biochar production route with new goethite nanoparticle precursor

Sci Total Environ. 2020 May 15:717:137091. doi: 10.1016/j.scitotenv.2020.137091. Epub 2020 Feb 3.

Authors

Divine Damertey Sewu¹, Hai Nguyen Tran², Godfred Ohemeng-Boahen¹, Seung Han Woo³

Affiliations

¹ Department of Chemical and Biological Engineering, Hanbat National University, 125 Dongseo-daero, Yuseong-gu, Daejeon 34158, Republic of Korea.
² Institute of Fundamental and Applied Sciences, Duy Tan University, Ho Chi Minh City 700000, Vietnam.
³ Department of Chemical and Biological Engineering, Hanbat National University, 125 Dongseo-daero, Yuseong-gu, Daejeon 34158, Republic of Korea. Electronic address: shwoo@hanbat.ac.kr.

PMID: 32084681
DOI: 10.1016/j.scitotenv.2020.137091

Abstract

This study developed a green and novel magnetic biochar via the co-pyrolysis of firwood biomass pre-treated with 10% (w/w) of either solid-phase (admixing; G10BC_A) or liquid-phase (impregnation; G10BC_I) goethite mineral (α-FeOOH). Newly fabricated magnetic biochars were characterized by inductively coupled plasma-optical emission spectroscopy (ICP-OES), Brunauer-Emmett-Teller (BET) equipment, X-ray powder diffractometry (XRD), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), proximate and elemental analyzer, and vibrating sample magnetometry. The effects of magnetic precursor, iron loading, and aqua-treatments on recoverability, magnetic property, and stability (resistance to α-FeOOH reconstructive crystallization/dissolution reactions) were explored and compared to those of magnetic biochar derived from conventional ferric chloride precursor (F10BC_I). Results confirmed a direct correlation between biochar yields and ash contents with iron loading, irrespective of the used types of magnetic precursors (α-FeOOH or FeCl₃). Although FeCl₃ can generate magnetic biochar (F10BC_I) with higher total carbon content (83.6%) and surface area (299 m²/g), α-FeOOH proved to be more effective at yielding magnetic biochars with nanostructured surfaces, lower water extractable components (thus green; G10BC_A = 0.21 mg/mL and G10BC_I = 0.16 mg/mL), higher magnetic saturation (G10BC_A = 10.0 emu/g and G10BC_I = 20.8 emu/g), higher ferromagnetic susceptibility, and excellent recoverability. α-FeOOH was undetected on the surface of G10BC_A, post-aqua-treatments (over 30 days), and this demonstrated its stability in the face of demagnetization via α-FeOOH reformation reactions. Consequently, this study demonstrated that the admixing solid-phase α-FeOOH (10%) with firwood biomass offered a green, facile, and efficient way to thermochemically produce magnetic biochar. The produced biochar exhibited a superb stability to α-FeOOH reconstructive crystallization/dissolution reactions in aquatic (aqua) media, green attributes, good magnetic properties, and great potential applications in many areas of the economy.

Keywords: Aqua-stability; Co-pyrolysis; Goethite nanoparticle; Green synthesis; Magnetic biochar.

MeSH terms

Charcoal
Iron Compounds
Magnetic Phenomena
Metal Nanoparticles*
Minerals

Substances

Iron Compounds
Minerals
biochar
goethite
Charcoal