In the last 15 years, new types of display technologies have increasingly replaced cathode ray tube (CRT) screens, which has led to an increase in landfill of old discarded CRT televisions, which present a great environmental challenge throughout the world due to their high lead content. In addition, environmental awareness has led to greater use of recycled aggregates to reduce the exploitation of existing reserves. This document aims to study the feasibility of incorporating CRT glass waste with recycled aggregate (RA) in combinations for use in civil engineering, more specifically in road bases and sub-bases. For the mechanical and environmental assessment of all of the samples and materials, the following procedures have been performed: the compliance batch test of UNE-EN 12457-4:2004 for RA, CRT, and mixtures; the Percolation Test according CEN/TS 14405 for the mixtures, CRT, and RA; Modified Proctor and load capacity (the California Bearing Ratio, or CBR) in all mixtures without cement addition, and finally, compressive strength of the material treated with cement at different ages of curing. The analysis of the mechanical and environmental properties through different techniques of lixiviation was positive, showing the ability to use CRT for certain dosage percentages mixed with recycled aggregates.
Keywords: cathode ray tube glass; cement-treated materials; civil infrastructures; recycled aggregates.