The current study explored the twin-screw melt granulation (TSMG) as a potential technology for the water solubility enhancement of biopharmaceutical classification system (BCS) class II drugs. As a model drug, carbamazepine (CBZ) was formulated with three different polymers as melt granules produced in a co-rotating twin-screw granulator. Polyethylene glycol 6000 (PEG 6000) and Kolliphor® (poloxamer) P407 were used as binding materials at two different granulation temperatures (Tmax: 70 °C; 100 °C). Additionally, Soluplus® (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) was chosen as binder of higher melting/ granulation temperature (Tmax: 140 °C). Temperature dependent polymorphic transition of CBZ during melt granulation was observed and identified using XRPD- (X-ray powder diffraction) and FTIR- (Fourier transform infrared spectroscopy) analysis. The effects of polymer type, polymer content (10, 15, 20% (w/w)) and granulation temperature on polymorphic transition, their impact on wettability (contact angle via drop shape-analysis), and the resulting dissolution performance at non-sink conditions in phosphate buffer (pH 6.8), were studied. This study showed that TSMG led to a crystalline system facilitating supersaturation when brought in solution, even when high drug loads (up to 90% (w/w)) were used. In general, for all granules produced, the supersaturation level and its duration varied with the extent of polymorphic transition and binder concentration. The results of this study indicated the importance of temperature control and polymer selection for tailoring desired dissolution profiles.
Keywords: Carbamazepine; Crystalline state; Dissolution enhancement; Extruder; Melt granulation; Polymer content; Polymorphic transition; Twin-screw granulator.
Copyright © 2020 Elsevier B.V. All rights reserved.