Ultrasound assisted oxidative deep-desulfurization of dimethyl disulphide from turpentine

Pankaj S Sinhmar; Parag R Gogate

doi:10.1016/j.ultsonch.2019.104925

Ultrasound assisted oxidative deep-desulfurization of dimethyl disulphide from turpentine

Ultrason Sonochem. 2020 May:63:104925. doi: 10.1016/j.ultsonch.2019.104925. Epub 2019 Dec 11.

Authors

Pankaj S Sinhmar¹, Parag R Gogate²

Affiliations

¹ Department of Chemical Engineering, Institute of Chemical Technology, Matunga, Mumbai 400019, India.
² Department of Chemical Engineering, Institute of Chemical Technology, Matunga, Mumbai 400019, India. Electronic address: pr.gogate@ictmumbai.edu.in.

PMID: 31945580
DOI: 10.1016/j.ultsonch.2019.104925

Abstract

A promising approach of ultrasound assisted oxidative desulfurization (UAOD) was studied for deep desulfurization of simulated sulphated turpentine containing dimethyl disulphide (DMDS) as model pollutant. The effect of ultrasound parameters such as power (80-120 W) and duty cycle (50-80%) as well as operating conditions as initial concentration (50-100 ppm), volume (100-300 ml) and temperature (28 °C as ambient condition, 50-70 °C) on the extent of desulfurization have been studied. The effect of addition of various oxidizing agents such as hydrogen peroxide over the range of 3-18 g/L, Fenton reagent by varying FeSO₄ loading from 0.75 g/L to 1.75 g/L at constant H₂O₂ loading and titanium dioxide (loading over the range 1-4 g/L) in the presence of ultrasonic horn have also been investigated at laboratory scale. The addition of oxidizing agents in presence of ultrasound enhanced the extent of DMDS removal. The extent of desulfurization was found to be remarkably low for individual approaches as compared to combination approaches of US/oxidizing agents. The kinetic analysis revealed that oxidation follows first order kinetics. A significant increase in cavitational yield was observed for combination approach of US/H₂O₂/TiO₂ (5.78 × 10^-9 g/L) compared to individual ultrasound approach (2.04 × 10^-9 g/L). Under best conditions of 120 W power, 70% duty cycle, 50 ppm initial concentration, 15 g/L H₂O₂ loading and 4 g/L TiO₂ loading, 100% desulfurization was obtained at 23.19 Rs/L as the treatment cost. Based on the obtained results it can be concluded that US/H₂O₂/TiO₂ approach is highly efficient desulfurization technique for deep desulfurization of simulated sulphated turpentine.

Keywords: Combination approaches; Desulfurization; Dimethyl disulphide; Intensification; Oxidizing agent; UAOD.