In-situ measurement of temperature and alkali metal concentration in municipal solid waste incinerators using flame emission spectroscopy

Waste Manag. 2020 Feb 1:102:486-491. doi: 10.1016/j.wasman.2019.11.015. Epub 2019 Nov 19.

Abstract

In order to address slagging, fouling and high-temperature corrosion problems caused by alkali metals in Municipal Solid Waste (MSW), in-situ measurement of alkali metal in MSW incinerators is needed. The paper presents experimental measurements of temperatures and alkali metal concentrations in two MSW incinerators based on Flame Emission Spectroscopy (FES). Through the analysis of spontaneous emission spectra and a calibration procedure, the concentration of gas phase sodium (Na) and potassium (K), temperature and thermal radiation in the incinerator were in-situ measured by a portable spectral system simultaneously. Experimental results showed MSW composition has significant effect on the measured gaseous Na and K. Higher volatile content in MSW may enhance the alkali metal emission. Besides that, the released gaseous Na and K in the two incinerators are correlated with temperature in incinerators. The study provided a low cost and effective solution for in-situ measurement of temperature and alkali metal concentration in MSW incinerators.

Keywords: Alkali metal; Combustion temperature; Flame emission spectroscopy; In-situ measurement; MSW incinerator.

MeSH terms

  • Incineration
  • Metals, Alkali*
  • Solid Waste*
  • Spectrum Analysis
  • Temperature

Substances

  • Metals, Alkali
  • Solid Waste