Static stretching is frequently performed to improve flexibility of the hamstrings, although the ankle position during hamstring stretching has not been fully investigated. We investigated the effects of ankle position during hamstring stretching on the decrease in passive stiffness. Fourteen healthy men performed static stretching for the hamstrings with the ankle dorsiflexed and plantar-flexed in a randomized order on different days. The hip was passively flexed to the maximum angle which could be tolerated without stretch pain with the knee fully extended; this was maintained for 5 min, with 1-min stretching performed in 5 sessions. Final angles and passive stiffness were measured before and after stretching. The final angle was defined as that formed by the tibia and horizontal plane when the knee was passively extended from hip and knee angles at 90° flexion to the maximum extension angle which could be tolerated without stretch pain. Passive stiffness was determined by the slope of torque-angle curve during the measurement of the final angle. The final angle significantly increased after stretching with the ankle dorsiflexed and plantar-flexed, whereas passive stiffness significantly decreased only after stretching with the ankle planter-flexed. The results suggest that passive stiffness decreases after stretching with the ankle planter-flexed but not after stretching with the ankle dorsiflexed, although the range of joint motion increases regardless of the ankle position during 5-min stretching for the hamstrings. These results indicate that static stretching should be performed with the ankle plantar-flexed when aiming to decrease passive stiffness of the hamstrings.
Keywords: Flexibility; Range of motion; Stiffness; Straight leg raise; Stretching.
Copyright © 2019 Elsevier Ltd. All rights reserved.