Multilevel Photonic Transistor Memory Devices Using Conjugated/Insulated Polymer Blend Electrets

ACS Appl Mater Interfaces. 2019 Nov 13;11(45):42429-42437. doi: 10.1021/acsami.9b14628. Epub 2019 Oct 30.

Abstract

Photonic data storage has diverse optoelectronic applications such as optical sensing and recording, integrated image circuits, and multibit-storage flash memory. In this study, we employ conjugated/insulated polymer blends as the charge storage electret for photonic field-effect transistor memory devices by exploring the blend composition, energy level alignment, and morphology on the memory characteristics. The studied conjugated polymers included poly(9,9-di-n-octylfluorenyl-2,7-diyl) (PF), poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV), poly[{2,5-di(3',7'-dimethyloctyloxy)-1,4-phenylene-vinylene}-co-{3-(4'-(3″,7″-dimethyloctyloxy)phenyl)-1,4-phenylenevinylene}-co-{3-(3'-(3',7'-dimethyloctyloxy)phenyl)-1,4-phenylenevinylene}] (SY-PPV), and poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,8-diyl)] (F8BT), and the insulated polymers were polystyrene (PS) and poly(methyl methacrylate) (PMMA). The photonic memory device using the PF/PS blend electret exhibited a dynamic switching behavior with light-writing and voltage-erasing processes both within only 1 s, along with a high contrast on the current on/off ratio between "Photo-On" and "Electrical-OFF" over 106 and the decent retention time for more than 3 months. In addition, the multilevel memory behavior could be observed using different light sources of 405, 450, and 520 nm or energy intensity, which was supported by surface potential analysis. The characteristics were superior to those of the devices using PF/PMMA blend due to the higher charge storage behavior of PS supported by fluorescence analysis. The PF/PS blend film prepared from the chlorobenzene solvent exhibited mesh-like and aggregated PF domains in the PS matrix and enhanced the contact surface area between the semiconductor and blend electret, leading to a higher memory window. The photonic memory behavior was also observed in the blend electrets of PS with the low band gap polymer, MEH-PPV, SY-PPV, or F8BT, by changing the photoresponsive light sources. Our study demonstrated a new electret system to apply on the multilevel photonic memory devices.

Keywords: electret; energy level; multilevel; photonic transistor memory; polymer blend.