Phase-transition field-effect transistors (FETs) are a class of steep-slope devices that show abrupt on/off switching owing to the metal-insulator transition (MIT) induced in the contacting materials. An important avenue to develop phase-transition FETs is to understand the charge injection mechanism at the junction of the contacting MIT materials and semiconductor channels. Here, toward the realization of high-performance phase-transition FETs, we investigate the contact properties of heterojunctions between semiconducting transition-metal dichalcogenides (TMDCs) and vanadium dioxide (VO2) that undergoes a MIT at a critical temperature (Tc) of approximately 340 K. We fabricated transistors based on molybdenum disulfide (MoS2) and tungsten diselenide (WSe2) in contact with the VO2 source/drain electrodes. The VO2-contacted MoS2 transistor exhibited n-type transport both below and above Tc. Across the MIT, the on-current was observed to increase only by a factor of 5, in contrast to the order-of-magnitude change in the resistance of the VO2 electrodes, suggesting the existence of high contact resistance. The Arrhenius analyses of the gate-dependent drain current confirmed the formation of the interfacial barrier at the VO2/MoS2 contacts, irrespective of the phase state of VO2. The VO2-contacted WSe2 transistor showed ambipolar transport, indicating that the Fermi level lies near the mid gap of WSe2. These observations provide insights into the contact properties of phase-transition FETs based on VO2 and TMDCs and suggest the need for contact engineering for high-performance operations.
Keywords: Fermi-level pinning; MoS2; WSe2; contact engineering; field-effect transistors; transition-metal dichalcogenides; vanadium dioxide.