A facile one-pot solvothermal method was applied to synthesize a magnetic biochar composite (MB) using phoenix tree leaves-derived biochar as the carbon matrix. The structure of MB was optimized by varying the load ratio and particle size of Fe3O4 nanoparticles on biochar. Time-dependent structure and composition evolution of solid and liquid phases during heterogeneous solvothermal process were investigated to understand the formation mechanism of MB. Firstly, Fe2+/Fe3+ ions were coordinated by oxygen-containing groups on biochar and part of them were hydrolyzed to form iron hydroxides. Then, those iron-containing precursors were thermally decomposed and reduced to iron oxides; and finally Fe3O4 nanoparticles were generated. The MB had an adsorption capacity for Cr(VI) of 55.0 mg/g in an aqueous solution, which exceeds those of biochar (39.8 mg/g) and Fe3O4 nanoparticles (26.5 mg/g). The adsorption mechanism study reveals that biochar as a carbon skeleton mainly provided binding sites for Cr(VI) and electron-donor groups for reduction of Cr(VI), while Fe3O4 nanoparticles mainly involved in the immobilization of newly formed Cr(III) through formation of Fe(III)-Cr(III) hydroxide. MB exhibited a stable structure with a lower Fe leakage at pH 2.0 than that of a comparable magnetic biochar sample prepared by conventional co-precipitation method. Recycling experiments suggested that MB could keep 84% of its initial removal capability for Cr(VI) even after seven cycles. The results indicate that solvothermal method is a promising alternative to prepare magnetic biochar for adsorption of heavy metal-containing wastewater.
Keywords: Adsorption; Cr(VI) removal; Formation mechanism; Magnetic biochar; Solvothermal process.
Copyright © 2019 Elsevier B.V. All rights reserved.