Molecularly imprinted polymer (MIP) receptors have been synthesized, characterized, and applied as new selective receptors in solid-contact ion selective electrodes (ISEs) towards non-dissociated 3,5-dihydroxytoluene (orcinol). Two monomers, namely methacrylic acid (MAA) and acrylamide (AA), were used in the preparation of MIP receptors. Graphene (Gr) was used as the solid contact material between the sensing membrane and the electrical contact substrate. Based on non-equilibrium sensing mechanism, the proposed sensors reveal observably enhanced detection sensitivity towards orcinol with detection limits 1.7 × 10-5 and 3.3 × 10-6 M for sensors based on MIP/MAA and MIP/AA, respectively. The selectivity coefficients measured by the modified separate solution method (MSSM) for the proposed sensors showed good selectivity towards orcinol over most common other phenols and inorganic anions. All measurements were made in the presence of 30 mM phosphate buffer solution (PBS) with a pH of 7.0. Potential stability for the proposed sensors was tested by constant-current chronopotentiometry. No water films were formed between the sensing membrane and the electron conductor substrate. The applicability of MIP/MAA incorporated ISE has been checked by recovery test of orcinol in the presence of soil matrix and by standard addition method.
Keywords: molecularly imprinted polymers (MIPs); neutral response mechanism; orcinol; sensors; solid-contact ISEs.