Ti6Al4V components, for biomedical and aerospace sectors, are receiving a great interest especially after the advent of additive manufacturing technologies. The most used techniques are Selective Laser Sintering (SLS), Selective Laser Melting (SLM) and Electron Beam Melting (EBM). In the current research, we developed 3D-printed Ti6Al4V scaffolds by Direct Ink Writing (DIW) technology. Appropriate ink formulations, based on water-titanium powder suspensions, were achieved by controlling the rheological properties of the developed inks. After printing process, and drying, the printed components were sintered at 1400 °C under high vacuum for 3 h. Highly porous titanium scaffolds (with porosity up to 65 vol%) were produced and different geometries were printed. The influence of the porosity on the morphology, compression strength and biocompatibility of the scaffolds was investigated.
Keywords: Additive manufacturing technologies; Direct ink writing; Pseudo plasticity; Titanium scaffolds.
Copyright © 2019 Elsevier B.V. All rights reserved.