Ecological manageability in manufacturing these days is a dire and exceptional issue and the principle concerns are identified with increasingly proficient utilization of energy and materials. Recycling can save a large amount greenhouse gas emissions, particularly in the case of aluminum. The parameter on the innovative technique on the direct recycling was investigated by employing design of experiments, via hot press forging process (DR-HPF). Thus, reutilizing of aluminum chips AA6061 with full factorial 32 design of experiment comprising a variety of working temperature and holding time were employed. Central composite design (CCD) was applied to outline the experiments towards evaluating the influences of the hot press forging parameters to the three responses; ultimate tensile strength (UTS), elongation to failure (ETF), and global warming potential (GWP). In conjunction with this, the environmental impacts associated with DR-HPF process are evaluated alongside the resultant conventional recycling (CR) by using re-melting route as indication. Experimental measurements, literature analysis and industrial data were merged to acquire the analysis of aluminum recycling life cycle. Clear conclusions were successfully drawn through the attained results on the outlook proposed by solid state direct recycling for the purpose of reducing the environmental effects by taking material and energy conservation as one of the most essential impacting factor. The global warming potential of a DR-HPF route gives a significant environmental impact where it is reduced up to 69.2% in comparison to the conventional (melting) routes.
Keywords: aluminum AA6061; direct metal recycling; hot press forging (HPF); life cycle assessment (LCA); response surface methodology (RSM); sustainable manufacturing.