The addition of salt to a colloid solution ensures that emulsions can be easily separated into two phases and that polymer latexes can be coagulated. The switchable stability of emulsions and polymer latexes would improve the properties for their current applications. A switchable process of salt addition can be achieved using CO₂ and switchable water, and it is a novel, benign approach to achieving a switchable ionic strength in an aqueous solution. However, the problem associated with switchable water is that its additives are all synthetic tertiary amines, most of which are harmful to human beings and the environment. Oligochitosan, as a natural product, can also be used as a switchable water additive. In this paper, a new switchable water system using oligochitosan to change the ionic strength was explored for use in several potential industrial applications. The conductivity of the aqueous solution of oligochitosan (0.2 wt.%) was switched from 0.2 to 331 μS/cm through the addition and removal of CO₂. Oligochitosan and CO₂ were successfully utilized to reversibly break a crude oil emulsion. Polystyrene (PS) latexes could also be reversibly destabilized; the zeta potential of the PS latex changed between -5.8 and -45.2 mV in the absence and presence of CO₂ after oligochitosan was dissolved in the PS latex. The use of oligochitosan is a more environmentally friendly means for reversibly separating colloid solutions.
Keywords: CO2; emulsion; latex; oligochitosan; salt addition.