Cascading phase transformations in high carbon steel resulting in the formation of inverse bainite: An atomic scale investigation

Rangasayee Kannan; Yiyu Wang; Jonathan Poplawsky; Sudarsanam Suresh Babu; Leijun Li

doi:10.1038/s41598-019-42037-9

Cascading phase transformations in high carbon steel resulting in the formation of inverse bainite: An atomic scale investigation

Sci Rep. 2019 Apr 3;9(1):5597. doi: 10.1038/s41598-019-42037-9.

Authors

Rangasayee Kannan¹, Yiyu Wang², Jonathan Poplawsky³, Sudarsanam Suresh Babu⁴, Leijun Li⁵

Affiliations

¹ Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta, T6G 2V4, Canada. rangasay@ualberta.ca.
² Materials Science and Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN, 37831-6064, USA.
³ Center for Nanophase Materials Sciences, Oak Ridge National Laboratory, PO Box 2008 MS 6064, Oak Ridge, TN, 37831-6064, USA.
⁴ Department of Mechanical, Aerospace and Biomedical Engineering, University of Tennessee, Knoxville, TN, 37996, USA.
⁵ Department of Chemical and Materials Engineering, University of Alberta, Edmonton, Alberta, T6G 2V4, Canada. leijun@ualberta.ca.

Abstract

Atom probe tomography (APT) has been used to understand the redistribution of solutes during the isothermal cascading phase transformations from supersaturated austenite resulting in the formation of inverse bainite. Different cascading reactions resulting in the formation of inverse bainite, namely the cementite midrib formation, ferrite formation, secondary cementite formation, and the degenerated microstructure of inverse bainite have been studied in detail. Solute profiles across the different transformation interfaces indicate Negligible Partitioning Local Equilibrium (NPLE) type growth kinetics for cementite midrib, whereas a transition in growth kinetics from Para Equilibrium (PE) to Negligible Partitioning Local Equilibrium (NPLE) is observed for secondary cementite and ferrite transformation. The results provide a strong indication that the inverse bainitic transformation occurs as a consequence of individual cascading phase transformations starting from parent austenite, and the transformation of inverse bainite occurs in a similar manner to Widmanstatten ferrite/bainitic ferrite with carbon diffusion-controlled growth, and without any reconstructive or long-range diffusion of substitutional solutes.