Objective: Given the growing interest in fluorine, it is necessary to develop new multi-tuned RF coils. Therefore, our objective is to design a simple and versatile double-tuned RF coil that can be used as a transmitter and receiver double-tuned coil (1H and 19F) or as transmitter-only double-tuned coil.
Materials and methods: A high-pass eight-element birdcage coil was built for 1H and 19F for a 7 T scanner. PIN diodes and cable traps to block unwanted common mode currents in cables were introduced to confer more flexibility to the coil. S-parameters and quality factor were measured in workbench and signal to noise ratio as well as signal intensity profiles in imaging experiments.
Results: Bench measurements show S11 values less than - 33 dB, S21 lower than - 13 dB and quality factors ratio of the order of 1.8 that are in agreement with good performances of a RF coil, as well as values of - 39 dB for 19F and - 30 dB for 1H as good detuning values. Signal intensity profiles prove excellent homogeneity at 1H and 19F.
Discussion: We present a simple structure of a double-tuned high-pass birdcage coil tuned to 1H and 19F that shows a great uniformity and sensitivity for 19F.
Keywords: Double-tuned; Fluorine; High-pass birdcage; PIN diode.