Polymeric ion selective electrodes are highly sensitive to changes in zero current ion flow and this offers a route to signal amplification in label-free potentiometric immunosensors. In this work, a label-free potentiometric immunosensor toward Salmonella typhimurium (ST) assembled in a home-made pipette-tip electrode is described. The signal-output amplification was implemented on a gold nanoparticle polymer inclusion membrane (AuNPs-PIM) which was used as sensing platform and for antibody immobilization. Additionally, a marker ion was used to detect the antibody-antigen binding event at the electrode surface. The immunosensor construction was performed in several steps: i) gold salt ions extraction in PVC membrane; ii) AuNPs formation using Na2EDTA as reduction agent; iii) antibody anti-Salmonella conjugation on AuNPs-PIM in pipette-tip electrodes. The potential shift observed in potentiometric measurements was derived simply from the blocking effect in the ionic flux caused by antigen-antibody conjugation, without no extra steps, mimetizing the ion-channel sensors. A detection limit of 6 cells mL-1 was attained. As proof-of-concept, recovery studies were performed in spiked commercial apple juice samples with success. Due to the simplicity of use, the appealing cost of equipment and sensor production and being able to provide a quick analytical response (less than 1 h for a complete assay, including sample preparation for analysis), this scheme represents a good prototype device for the detection of foodborne pathogens like ST or other immune-responsive bacteria.
Keywords: Gold nanoparticles; Immunosensor; Polymer inclusion membranes; Potentiometry; Salmonella typhimurium.
Copyright © 2018 Elsevier B.V. All rights reserved.