High-rate activated sludge processes for municipal wastewater treatment: the effect of food waste addition and hydraulic limits of the system

Environ Sci Pollut Res Int. 2019 Jan;26(2):1770-1780. doi: 10.1007/s11356-018-3665-8. Epub 2018 Nov 19.

Abstract

Conventional activated sludge (CAS) process is one of the most commonly applied processes for municipal wastewater treatment. However, it requires a high energy input and does not promote energy recovery. Currently, high-rate activated sludge (HRAS) process is gaining importance as a good option to reduce the energy demand of wastewater treatment and to capture organic matter for valorizing through anaerobic digestion (AD). Besides, food waste addition to wastewater can help to increase the organic matter content of wastewater and thus, energy recovery in AD. The objective of this study is to evaluate the applicability of co-treatment of municipal wastewater and food waste in a pilot-scale HRAS system as well as to test the minimal hydraulic retention times (HRTs) such as 60 and 30 min. Food waste addition to the wastewater resulted in a 10% increase in chemical oxygen demand (COD) concentration of influent. In the following stages of the study, the pilot-scale system was operated with wastewater solely under the HRTs of 60 and 30 min. With the decrease of HRT, particulate COD removal increased; however, soluble COD removal decreased. The results demonstrated that if the settling process is optimized, more particulate matter can be diverted to sludge stream.

Keywords: Co-treatment; Food waste; High-rate activated sludge process; Hydraulic retention time; Municipal wastewater; Particulate chemical oxygen demand.

MeSH terms

  • Anaerobiosis
  • Biological Oxygen Demand Analysis
  • Bioreactors
  • Food*
  • Pilot Projects
  • Sewage
  • Waste Disposal, Fluid / instrumentation
  • Waste Disposal, Fluid / methods*
  • Wastewater / chemistry

Substances

  • Sewage
  • Waste Water