Economical and abundant natural biological materials provide a low-cost and scalable approach to develop next-generation flexible and wearable electronics. Herein, a universal strategy of nature-inspired and amine-promoted metallization, namely, NIAPM, is presented to make high-quality metals for electronics fabrication. The introduction of poly(ethyleneimine) (PEI) significantly shortens the time of metallization from >48 h to ≈6 h, and the phenol compounds (TP) from green tea make metals bond tightly on all demonstrated surfaces. The as-made thin metal films of Cu and Ni feature high conductivity (∼1.0 Ω/□), excellent mechanical stability and flexibility even at the bending radius of ∼1 mm. Moreover, NIAPM is compatible with typical lithography techniques for fabricating metallic patterns, showing considerable potential applications in flexible electronics. As a proof-of-concept, two devices based on melamine-templated Cu sponges are first prepared for detecting the change of external pressure with a resistance sensitivity of 18.1 kPa-1 and collecting high-viscosity crude oil, respectively. Then, a high-performance bendable solid supercapacitor is demonstrated using as-prepared Ni metallized fabrics and the activated porous carbon from the recycled waste in NIPAM as flexible electrodes, which possesses comparable areal capacitance of 45.5 F·g-1, and energy density of 7.88 Wh·g-1 at the power density of 35 W·g-1. Therefore, it is anticipated that such a time-saving, cost-effective and whole solution-processed NIAPM strategy can inspire further practical applications in the fields of surface chemistry, material science, flexible and wearable electronics, etc.
Keywords: electroless metallization; flexible electronics; mussel-inspired polymer; natural biological materials; plant polyphenols.