Tritium (3H) is an essential tracer of the Earth's water cycle; yet widespread adoption of tritium in hydrologic studies remains a challenge because of analytical barriers to quantification and detection of 3H by electrolytic pre-concentration. Here, we propose a simple tritium electrolytic enrichment system based on the use of solid polymer electrolyte membranes (PEMs) that can be used to enrich 3H in 250-3000 mL environmental water samples to a 10-mL final volume. The IAEA PEM-3H system reported here can produce high enrichment factors (>70-fold) and, importantly, removes some of the deterrents to conventional 3H enrichments methods, including the use of toxic electrolysis and neutralization chemicals, spike standards, a complex electrolysis apparatus that requires extensive cooling and temperature controls, and improves precision by eliminating the need for tracking recovery gravimetrics. Preliminary results with varying operating conditions show 3H enrichments to 70-fold and higher are feasible, spanning a wide range of tritium activities from 5 to 150 TU with a precision of ∼4.5 %. Further work is needed to quantify inter-sample memory and to establish lower 3H detection limits. The IAEA PEM-3H system is open source, with 3-D CAD and design files made freely available for adoption and improvement by others.
Keywords: Electrolysis; hydrogen-2; hydrogen-3; isotope measurements; methods and equipment; tritium enrichment; water age dating.