Investigation of diamond wheel topography in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire using fractal analysis method

Qiuyan Wang; Wenxiang Zhao; Zhiqiang Liang; Xibin Wang; Tianfeng Zhou; Yongbo Wu; Li Jiao

doi:10.1016/j.ultras.2017.10.012

Investigation of diamond wheel topography in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire using fractal analysis method

Ultrasonics. 2018 Mar:84:87-95. doi: 10.1016/j.ultras.2017.10.012. Epub 2017 Oct 16.

Authors

Qiuyan Wang¹, Wenxiang Zhao², Zhiqiang Liang³, Xibin Wang⁴, Tianfeng Zhou⁵, Yongbo Wu⁶, Li Jiao⁷

Affiliations

¹ Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, PR China. Electronic address: wangqy1019@126.com.
² Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, PR China. Electronic address: zhaowx@bit.edu.cn.
³ Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, PR China. Electronic address: liangzhiqiang@bit.edu.cn.
⁴ Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, PR China. Electronic address: cutting0@bit.edu.cn.
⁵ Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, PR China. Electronic address: zhoutf@bit.edu.cn.
⁶ Department of Mechanical and Energy Engineering, Southern University of Science and Technology, PR China. Electronic address: wuyb@sustc.edu.cn.
⁷ Key Laboratory of Fundamental Science for Advanced Machining, Beijing Institute of Technology, PR China. Electronic address: jiaoli@bit.edu.cn.

PMID: 29096190
DOI: 10.1016/j.ultras.2017.10.012

Abstract

The wear behaviors of grinding wheel have significant influence on the work-surface topography. However, a comprehensive and quantitative method is lacking for evaluating the wear conditions of grinding wheel. In this paper, a fractal analysis method is used to investigate the wear behavior of resin-bonded diamond wheel in Elliptical Ultrasonic Assisted Grinding (EUAG) of monocrystal sapphire, and a series of experiments on EUAG and conventional grinding (CG) are performed. The results show that the fractal dimension of grinding wheel topography is highly correlated to the wear behavior, i.e., grain fracture, grain pullout, and wheel loading. An increase in cutting edge density on the wheel surface results in an increase of the fractal dimension, but an increase in the grain pullout and wheel loading results in a decrease in the fractal dimension. The wheel topography in EUAG has a higher fractal dimension than that in CG before 60 passes due to better self-sharpening behavior, and then has a smaller fractal dimension because of more serious wheel loadings after 60 passes. By angle-dependent distribution analysis of profile fractal dimensions, the wheel surface topography is transformed from isotropic to anisotropic. These indicated that the fractal analysis method could be further used in monitoring of a grinding wheel performance in EUAG.

Keywords: Elliptical ultrasonic assisted grinding; Fractal analysis; Micro fracture; Resin-bonded diamond wheel; Wear.