This study aimed to determine the effect of different percentages of body weight support (BWS) on spatiotemporal step characteristics during running. 26 endurance runners (age: 37 ± 9 years) completed a running treadmill protocol consisting of 6 different conditions (BWS combinations: 0-50%), with velocity maintained at 12 km/h. Each condition lasted 1 minute. Step angle, ground contact time (CT), flight time (FT), step length (SL) and frequency (SF), and duration of phases during stance time (phase1: initial contact; phase2: midstance; phase3: propulsion) were measured for every step during the test using a photoelectric cell system. Compared with the baseline condition (100% BW), FT was longer, CT was shorter, SL was longer, SF was lower, and the step angle was higher with each increase in BWS (p < 0.05). Also, some changes were observed in the duration of phases during stance time: phase1 did not experience changes across experimental conditions (p = 0.096), phase2 decreased and phase3 increased as BW was supported (p < 0.05). These results indicate that as BW was supported, runners showed longer FT and SL, shorter CT, lower SF, and greater step angle as well as some changes in the phases during the ground contact. Therefore, this study highlights the effect of different percentages of BWS on spatiotemporal parameters.
Keywords: Endurance runners; lower body positive pressure treadmill; spatial-temporal parameters.