Rainwater harvesting in catchments for agro-forestry uses: A study focused on the balance between sustainability values and storage capacity

D P S Terêncio; L F Sanches Fernandes; R M V Cortes; J P Moura; F A L Pacheco

doi:10.1016/j.scitotenv.2017.09.198

Rainwater harvesting in catchments for agro-forestry uses: A study focused on the balance between sustainability values and storage capacity

Sci Total Environ. 2018 Feb 1:613-614:1079-1092. doi: 10.1016/j.scitotenv.2017.09.198. Epub 2017 Sep 22.

Authors

D P S Terêncio¹, L F Sanches Fernandes¹, R M V Cortes¹, J P Moura¹, F A L Pacheco²

Affiliations

¹ Centre for the Research and Technology of Agro-Environment and Biological Sciences, University of Trás-os-Montes and Alto Douro, Ap. 1013, 5001-801 Vila Real, Portugal.
² Chemistry Research Centre, University of Trás-os-Montes and Alto Douro, Ap. 1013, 5001-801 Vila Real, Portugal. Electronic address: fpacheco@utad.pt.

PMID: 28950670
DOI: 10.1016/j.scitotenv.2017.09.198

Abstract

Rainwater harvesting (RWH) is used to support small-scale agriculture and handle seasonal water availability, especially in regions where populations are scattered or the costs to develop surface or groundwater resources are high. However, questions may arise as whether this technique can support larger-scale irrigation projects and in complement help the struggle against wildfires in agro-forested watersheds. The issue is relevant because harvested rainwater in catchments is usually accumulated in small-capacity reservoirs created by small-height dams. In this study, a RWH site allocation method was improved from a previous model, by introducing the dam wall height as evaluation parameter. The studied watershed (Sabor River basin) is mostly located in the Northeast of Portugal. This is a rural watershed where agriculture and forestry uses are dominant and where ecologically relevant regions (e.g., Montezinho natural park) need to be protected from wildfires. The study aimed at ranking 384 rainfall collection sub-catchments as regards installation of RWH sites for crop irrigation and forest fire combat. The height parameter was set to 3m because this value is a reference to detention basins that hold sustainability values (e.g., landscape integration, environmental protection), but the irrigation capacity under these settings was smaller than 10ha in 50% of cases, while continuous arable lands in the Sabor basin cover on average 222ha. Besides, the number of sub-catchments capable to irrigate the average arable land was solely 7. When the dam wall height increased to 6 and 12m, the irrigation capacity increased to 46 and 124 sub-catchments, respectively, meaning that more engineered dams may not always ensure all sustainability values but warrant much better storage. The limiting parameter was the dam wall height because 217 sub-catchments were found to drain enough water for irrigation and capable to store it if proper dam wall heights were used.

Keywords: Agro-forestry uses; Rainwater harvesting; Spatial Multi Criteria Analysis; Storage capacity; Suitability map; Sustainability values.