Air-assisted liquid-liquid microextraction using floating organic droplet solidification for simultaneous extraction and spectrophotometric determination of some drugs in biological samples through chemometrics methods

Spectrochim Acta A Mol Biomol Spectrosc. 2018 Jan 5:188:72-79. doi: 10.1016/j.saa.2017.06.069. Epub 2017 Jul 3.

Abstract

An air assisted liquid-liquid microextraction by applying the solidification of a floating organic droplet method (AALLME-SFOD) coupled with a multivariate calibration method, namely partial least squares (PLS), was introduced for the fast and easy determination of Atenolol (ATE), Propanolol (PRO) and Carvedilol (CAR) in biological samples via a spectrophotometric approach. The analytes would be extracted from neutral aqueous solution into 1-dodecanol as an organic solvent, using AALLME. In this approach a low-density solvent with a melting point close to room temperature was applied as the extraction solvent. The emulsion was immediately formed by repeatedly pulling in and pushing out the aqueous sample solution and extraction solvent mixture via a 10-mL glass syringe for ten times. After centrifugation, the extractant droplet could be simply collected from the aqueous samples by solidifying the emulsion at a lower than the melting point temperature. In the next step, analytes were back extracted simultaneously into the acidic aqueous solution. Derringer and Suich multi-response optimization were utilized for simultaneous optimizing the parameters of three analytes. This method incorporates the benefits of AALLME and dispersive liquid-liquid microextraction considering the solidification of floating organic droplets (DLLME-SFOD). Calibration graphs under optimized conditions were linear in the range of 0.30-6.00, 0.32-2.00 and 0.30-1.40μg mL-1 for ATE, CAR and PRO, respectively. Other analytical parameters were obtained as follows: enrichment factors (EFs) were found to be 11.24, 16.55 and 14.90, and limits of detection (LODs) were determined to be 0.09, 0.10 and 0.08μg mL-1 for ATE, CAR and PRO, respectively. The proposed method will require neither a highly toxic chlorinated solvent for extraction nor an organic dispersive solvent in the application process; hence, it is more environmentally friendly.

Keywords: Air-assisted liquid–liquid microextraction; Floating organic droplet; Human plasma; Multi-response optimization; Partial least squares; Urine; β-adrenergic blockers.

MeSH terms

  • Calibration
  • Centrifugation
  • Humans
  • Hydrogen-Ion Concentration
  • Least-Squares Analysis
  • Liquid Phase Microextraction / methods*
  • Multivariate Analysis
  • Organic Chemicals / chemistry*
  • Pharmaceutical Preparations / analysis*
  • Sodium Chloride / chemistry
  • Solvents / chemistry
  • Spectrophotometry / methods*
  • Spectrophotometry, Ultraviolet
  • Surface-Active Agents / chemistry
  • Time Factors

Substances

  • Organic Chemicals
  • Pharmaceutical Preparations
  • Solvents
  • Surface-Active Agents
  • Sodium Chloride