A Surface Acoustic Wave (SAW) hydrogen sensor with a Pd/ZnO bilayer structure for room temperature sensing operation has been obtained by Pulsed Laser Deposition (PLD). The sensor structure combines a Pd layer with optimized porosity for maximizing mass effects, with the large acoustoelectric effect at the Pd/ZnO interface. The large acoustoelectric effect is due to the fact that ZnO has a surface conductivity which is highly sensitive to chemisorbed gases. The sensitivity of the sensor was determined for hydrogen concentrations between 0.2% and 2%. The limit of detection (LOD) of the bilayer sensor was about 4.5 times better than the single ZnO films and almost twice better than single Pd films.
Keywords: Palladium; SAW sensor; ZnO; bilayer; hydrogen sensor; nanoporous film; pulsed laser deposition.