Flexible Zinc-Tin Oxide Thin Film Transistors Operating at 1 kV for Integrated Switching of Dielectric Elastomer Actuators Arrays

Abstract

Flexible high-voltage thin-film transistors (HVTFTs) operating at more than 1 kV are integrated with compliant dielectric elastomer actuators (DEA) to create a flexible array of 16 independent actuators. To allow for high-voltage operation, the HVTFT implements a zinc-tin oxide channel, a thick dielectric stack, and an offset gate. At a source-drain bias of 1 kV, the HVTFT has a 20 µA on-current at a gate voltage bias of 30 V. Their electrical characteristics enable the switching of DEAs which require drive voltages of over 1 kV, making control of an array simpler in comparison to the use of external high-voltage switching. These HVTFTs are integrated in a flexible haptic display consisting of a 4 × 4 matrix of DEAs and HVTFTs. Using a single 1.4 kV supply, each DEA is independently switched by its associated HVTFT, requiring only a 30 V gate voltage for full DEA deflection. The 4 × 4 display operates well even when bent to a 5 mm radius of curvature. By enabling DEA switching at low voltages, flexible metal-oxide HVTFTs enable complex flexible systems with dozens to hundreds of independent DEAs for applications in haptics, Braille displays, and soft robotics.

Keywords: amorphous metal oxides; dielectric elastomer actuators; flexible electronics; haptic displays; thin film transistors.