Platelet activation of mechanical versus bioprosthetic heart valves during systole

J Biomech. 2017 May 3:56:111-116. doi: 10.1016/j.jbiomech.2017.03.002. Epub 2017 Mar 11.

Abstract

Thrombus formation is a major concern for recipients of mechanical heart valves (MHVs), which requires them to take anticoagulant drugs for the rest of their lives. Bioprosthetic heart valves (BHVs) do not require life-long anticoagulant therapy but deteriorate after 10-15years. The thrombus formation is initiated by the platelet activation which is thought to be mainly generated in MHVs by the flow through the hinge and the leakage flow during the diastole. However, our results show that the activation in the bulk flow during the systole phase might play an essential role as well. This is based on our results obtained by comparing the thrombogenic performance of a MHV and a BHV (as control) in terms of shear induced platelet activation under exactly the same conditions. Three different mathematical activation models including linear level of activation, damage accumulation, and Soares model are tested to quantify the platelet activation during systole using the previous simulations of the flow through MHV and BHV in a straight aorta under the same physiologic flow conditions. Results indicate that the platelet activation in the MHV at the beginning of the systole phase is slightly less than the BHV. However, at the end of the systole phase the platelet activation by the bulk flow for the MHV is several folds (1.41, 5.12, and 2.81 for linear level of activation, damage accumulation, and Soares model, respectively) higher than the BHV for all tested platelet activation models.

Keywords: Bioprosthetic heart valve; Eulerian framework; Mechanical heart valve; Platelet activation; Systole phase.

MeSH terms

  • Aorta / physiology
  • Heart Valve Prosthesis*
  • Heart Valves / physiology*
  • Models, Cardiovascular*
  • Platelet Activation*
  • Systole / physiology*