This article reports on the use of the binder jetting three-dimensional printing process combined with sintering to process bioceramic materials to form micro- and macroporous three-dimensional structures. Three different glass-ceramic formulations, apatite-wollastonite and two silicate-based glasses, have been processed using this route to create porous structures which have Young's modulus equivalent to cortical bone and average bending strengths in the range 24-36 MPa. It is demonstrated that a range of macroporous geometries can be created with accuracies of ±0.25 mm over length scales up to 40 mm. Hot-stage microscopy is a valuable tool in the definition of processing parameters for the sintering step of the process. Overall, it is concluded that binder jetting followed by sintering offers a versatile process for the manufacture of load-bearing bioceramic components for bone replacement applications.
Keywords: Additive manufacturing; bioactive glasses; bioceramics; bone scaffolds; three-dimensional printing.