Polydopamine (PDA) thin films are introduced to the surface modification of biosensor surfaces utilizing surface plasmon enhanced fluorescence spectroscopy (SPFS) as the linker layer of capture antibody on to the sensor surfaces. The capture antibody can be directly attached to the sensor surface without using any coupling agent by functionalizing the gold sensor surface with PDA thin films. The PDA coating is performed by a single-step preparation process by applying the dopamine solution on the sensor surface, which requires an extremely short incubation time (10 min). The real-time in situ measurement of the adsorption kinetics of the capture antibody onto the PDA-coated sensor surface is studied by surface plasmon resonance (SPR) spectroscopy. It reveals that the immobilization of capture antibody immediately occurs after introduction of a solution containing capture antibody, and the sensor surface is fully covered with the capture antibody. The sensitive detection of the cytokine marker interleukin-6 (IL-6) is performed by SPFS using a sandwich assay format with fluorescently labeled detection antibody. The sensor chips functionalized by PDA chemistry exhibited sensitive sensor responses with low nonspecific adsorption of the detection antibody onto the sensor surface. The detection limit of IL-6 with the developed SPFS biosensor is determined to be 2 pg/mL (100 fM), which is within the range of the diagnostic criteria. Our observation elucidates the remarkable utility of PDA coatings for chemical modification of the metallic sensor surfaces by a simple, brief, and inexpensive manner.
Keywords: Interleukin-6; biosensor; polydopamine; surface chemistry; surface plasmon enhanced fluorescence.