This work reports on the formation of highly hydrophobic coatings from waterborne latexes able to form films at ambient temperature. The contact angle of film forming copolymers of 2-ethylhexyl acrylate and perfluorodecyl acrylate (PFDA) was limited to 114° because flat surfaces were obtained. Attempts to increase the roughness of the film using blends of film-forming latexes with the latex of PFDA homopolymer (which is not film forming) were not successful under regular casting conditions because the PFDA particles accumulated at the film-substrate interface. Film formation engineering allowed modifying the morphology of the film obtaining a contact angle of 137°.