We studied the electrochemical characteristics of tin dioxide (SnO2) recovered from waste catalyst material which had been previously used in a polymer synthesis reaction. In order to improve the electrochemical performance of the SnO2 anode electrode, we synthesized a nanocomposite of recovered SnO2 and commercial iron oxide (Fe2O3) (weight ratio 95:5) using a solid state method. X-ray diffraction (XRD) and field emission scanning electron microscopy (FE-SEM) analyses revealed an additional iron oxide phase within a porous nanocomposite architecture. The electrochemical characterizations were based on galvanostatic charge-discharge (CD) curves, cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). In the first discharge, the capacity of the SnO2-Fe2O3 nanocomposite was 1700 mAh g(-1), but was reduced to about 1200 mAh g(-1) in the second discharge. Thereafter, a discharge capacity of about 1000 mAh g(-1)was maintained up to the 20th cycle. The SnO2-Fe2O3 nanocomposite showed better reversible capacities and rate capabilities than either the recovered SnO2 or commercial Fe2O3 nanoparticle samples.
Keywords: Anode; Fe2O3; Lithium secondary battery; Nanocomposite; Recovery; SnO2.