Perovskite-containing tandem solar cells are attracting attention for their potential to achieve high efficiencies. We demonstrate a series connection of a ∼ 90 nm thick perovskite front subcell and a ∼ 100 nm thick polymer:fullerene blend back subcell that benefits from an efficient graded recombination layer containing a zwitterionic fullerene, silver (Ag), and molybdenum trioxide (MoO3). This methodology eliminates the adverse effects of thermal annealing or chemical treatment that occurs during perovskite fabrication on polymer-based front subcells. The record tandem perovskite/polymer solar cell efficiency of 16.0%, with low hysteresis, is 75% greater than that of the corresponding ∼ 90 nm thick perovskite single-junction device and 65% greater than that of the polymer single-junction device. The high efficiency of this hybrid tandem device, achieved using only a ∼ 90 nm thick perovskite layer, provides an opportunity to substantially reduce the lead content in the device, while maintaining the high performance derived from perovskites.
Keywords: fullerene interlayers; high efficiency; high open-circuit voltage; interface engineering; inverted structure; perovskite solar cells; polymer solar cells; tandem solar cells.