Laparoscopic Pectopexy: A Biomechanical Analysis

PLoS One. 2016 Feb 4;11(2):e0144143. doi: 10.1371/journal.pone.0144143. eCollection 2016.

Abstract

Introduction: Pectopexy, a laparoscopic method for prolapse surgery, showed promising results in recent literature. Further improving this approach by reducing surgical time may decrease complication rates and patient morbidity. Since laparoscopic suturing is a time consuming task, we propose a single suture /mesh ileo-pectineal ligament fixation as opposed to the commonly used continues approach.

Methods: Evaluation was performed on human non-embalmed, fresh cadaver pelves. A total of 33 trials was performed. Eight female pelves with an average age of 75, were used. This resulted in 16 available ligaments. Recorded parameters were ultimate load, displacement at failure and stiffness.

Results: The ultimate load for the mesh + simplified single "interrupted" suture (MIS) group was 35 (± 12) N and 48 (± 7) N for the mesh + continuous suture (MCS) group. There was no significant difference in the ultimate load between both groups (p> 0.05). This was also true for displacement at failure measured at 37 (± 12) mm and 36 (±5) mm respectively. There was also no significant difference in stiffness and failure modes.

Conclusion: Given the data above we must conclude that a continuous suture is not necessary in laparoscopic mesh / ileo-pectineal ligament fixation during pectopexy. Ultimate load and displacement at failure results clearly indicate that a single suture is not inferior to a continuous approach. The use of two single sutures may improve ligamental fixation. However, overall stability should not benefit since the surgical mesh remains the limiting factor.

Publication types

  • Evaluation Study

MeSH terms

  • Aged
  • Biomechanical Phenomena
  • Cadaver
  • Female
  • Humans
  • Laparoscopy / methods*
  • Ligaments / surgery*
  • Pelvic Organ Prolapse / surgery
  • Pelvis / surgery*
  • Surgical Mesh
  • Suture Techniques*
  • Weight-Bearing

Grants and funding

The authors have no support or funding to report.