The electrochemical reduction of CO(2) has been extensively studied over the past decades. Nevertheless, this topic has been tackled so far only by using a very fundamental approach and mostly by trying to improve kinetics and selectivities toward specific products in half-cell configurations and liquid-based electrolytes. The main drawback of this approach is that, due to the low solubility of CO(2) in water, the maximum CO(2) reduction current which could be drawn falls in the range of 0.01-0.02 A cm(-2). This is at least an order of magnitude lower current density than the requirement to make CO(2)-electrolysis a technically and economically feasible option for transformation of CO(2) into chemical feedstock or fuel thereby closing the CO(2) cycle. This work attempts to give a short overview on the status of electrochemical CO(2) reduction with respect to challenges at the electrolysis cell as well as at the catalyst level. We will critically discuss possible pathways to increase both operating current density and conversion efficiency in order to close the gap with established energy conversion technologies.