[Airway Obstruction Caused by Heat and Moisture Exchange Filter Used during General Anesthesia: A Case Report and an In Vitro Study]

Masui. 2015 Aug;64(8):811-4.
[Article in Japanese]

Abstract

Background: A previously healthy 54-year-old woman underwent a resection of the acoustic tumor. Following induction of general anesthesia and tracheal intubation, volume-controlled ventilation was started and the patient was placed in the left park bench position. The heat and moisture exchange filter (HMEF) was placed within the ventilatory circuit and positioned below the patient's head to avoid unintentional extubation. Six hours after the start of surgery, peak inspiratory pressure gradually rose, and 2 hours later ventilation of the patient's lung became increasingly difficult. When the HMEF was replaced, normal breathing was promptly restored.

Methods: We reproduced this scenario with a similar HMEF under the same ventilator settings by adding 0-8 g of normal saline into the HMEF housing, and measured the inspiratory pressure and tidal volume across the HMEF.

Results: When instilling 4 g of saline, an increase in inspiratory pressure occurred.

Conclusions: This case shows a potential risk of unexpectedly early occurrence of obstruction of the HMEF due to accumulation of condensed water within the device when the HMEF was positioned below the patient's head. We recommend selection of the appropriate HMEF and suitable mounting to avoid this problem.

Publication types

  • Case Reports

MeSH terms

  • Airway Obstruction / etiology*
  • Anesthesia, General / adverse effects*
  • Anesthesia, General / instrumentation
  • Female
  • Filtration / instrumentation
  • Hot Temperature / adverse effects
  • Humans
  • Humidity
  • Intubation, Intratracheal
  • Middle Aged