Phosphorus retention capacity in red ferralitic soil

Water Sci Technol. 2014;70(9):1561-8. doi: 10.2166/wst.2014.410.

Abstract

In this study the main physical-chemical characteristics of red ferralitic soil to use as substrate in subsurface wetlands was determined. The P-removal was evaluated in a short-term isotherm batch experiment and in a column percolation experiment. The acid characteristic and high content of iron minerals in the red ferralitic soil facilitated the phosphorus removal. Also the sorption isotherms at two different temperatures were obtained. The results showed that the sorption capacity increases with an increase in solution temperature from 25 to 35 °C. The experimental data were fitted to Langmuir and Freundlich models, having a better fit to the Freundlich isotherms. The maximum P-sorption capacities estimated using the Langmuir isotherm were 0.96 and 1.13 g/kg at 25 and 35 °C respectively. Moreover a column experiment was carried out at two different flows. Sequential extractions of the phosphorus-saturated soil indicated that phosphorus is mainly bound with iron or aluminum minerals. The results have demonstrated a good potential for red ferralitic soil for phosphorus removal from urban wastewater.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Adsorption
  • Models, Theoretical
  • Phosphorus / chemistry*
  • Soil Pollutants / chemistry*
  • Water Pollutants, Chemical / chemistry*
  • Wetlands*

Substances

  • Soil Pollutants
  • Water Pollutants, Chemical
  • Phosphorus