Positive role of surface defects on carbon nanotube cathodes in overpotential and capacity retention of rechargeable lithium-oxygen batteries

ACS Appl Mater Interfaces. 2014 Dec 10;6(23):21567-75. doi: 10.1021/am506564n. Epub 2014 Nov 24.

Abstract

Surface defects on carbon nanotube cathodes have been artificially introduced by bombardment with argon plasma. Their roles in the electrochemical performance of rechargeable Li-O2 batteries have been investigated. In batteries with tetraethylene glycol dimethyl ether (TEGDME)- and N-methyl-N-propylpiperidinium bis(trifluoromethansulfonyl)imide (PP13TFSI)-based electrolytes, the defects increase the number of nucleation sites for the growth of Li2O2 particles and reduce the size of the formed particles. This leads to increased discharge capacity and reduced cycle overpotential. However, in the former batteries, the hydrophilic surfaces induced by the defects promote carbonate formation, which imposes a deteriorating effect on the cycle performance of the Li-O2 batteries. In contrast, in the latter case, the defective cathodes promote Li2O2 formation without enhancing formation of carbonates on the cathode surfaces, resulting in extended cycle life. This is most probably attributable to the passivation effect on the functional groups of the cathode surfaces imposed by the ionic liquid. These results indicate that defects on carbon surfaces may have a positive effect on the cycle performance of Li-O2 batteries if they are combined with a helpful electrolyte solvent such as PP13TFSI.

Keywords: argon-plasma bombardment; carbon nanotubes; carbonate species; lithium peroxides; lithium−oxygen batteries; surface defects.

Publication types

  • Research Support, Non-U.S. Gov't