The acinus-mimicking microfluidic chip, which simulates the in vivo condition of the liver, was developed and reported in this paper. The gradient microenvironment of the liver acinus is replicated within this proposed microfluidic chip. The advantage of this acinus-mimicking chip is capable of adjusting the concentration gradient in a relatively short period of time at around 10 s. At the same instance the non-linear concentration gradient can be presented in the various zones within this microfluidic chip. The other advantage of this proposed design is in the convenience of allowing the direct injection of the cells into the chip. The environment within the chip is multi-welled and gel-free with high cell density. The multi-row pillar microstructure located at the entrance of the top and bottom flow channels is designed to be able to balance the pressure of the perfusion medium. Through this mechanism the shear stress experienced by the cultured cells can be minimized to reduce the potential damage flow from the perfusion process. The fluorescence staining and the observations of the cell morphology verify the life and death of the cells. The shear stress experienced by the cells in the various zones within the chip can be effectively mapped. The serum glutamic oxaloacetic transaminase (SGOT) collected from the supernatants was used to determine the effects of the degassing process and the shear stress of the medium flow on the cultured cells.