Residual CO2 trapping in Indiana limestone

Environ Sci Technol. 2013 Jan 2;47(1):227-33. doi: 10.1021/es304166u. Epub 2012 Nov 30.

Abstract

We performed core flooding experiments on Indiana limestone using the porous plate method to measure the amount of trapped CO(2) at a temperature of 50 °C and two pressures: 4.2 and 9 MPa. Brine was mixed with CO(2) for equilibration, then the mixture was circulated through a sacrificial core. Porosity and permeability tests conducted before and after 884 h of continuous core flooding confirmed negligible dissolution. A trapping curve for supercritical (sc)CO(2) in Indiana showing the relationship between the initial and residual CO(2) saturations was measured and compared with that of gaseous CO(2). The results were also compared with scCO(2) trapping in Berea sandstone at the same conditions. A scCO(2) residual trapping end point of 23.7% was observed, indicating slightly less trapping of scCO(2) in Indiana carbonates than in Berea sandstone. There is less trapping for gaseous CO(2) (end point of 18.8%). The system appears to be more water-wet under scCO(2) conditions, which is different from the trend observed in Berea; we hypothesize that this is due to the greater concentration of Ca(2+) in brine at higher pressure. Our work indicates that capillary trapping could contribute to the immobilization of CO(2) in carbonate aquifers.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Air Pollutants / chemistry*
  • Calcium / chemistry
  • Calcium Carbonate / chemistry*
  • Carbon Dioxide / chemistry*
  • Carbon Sequestration*
  • Geological Phenomena
  • Hot Temperature
  • Magnesium / chemistry
  • Porosity
  • Pressure
  • Salts / chemistry
  • Solubility

Substances

  • Air Pollutants
  • Salts
  • brine
  • Carbon Dioxide
  • Calcium Carbonate
  • Magnesium
  • Calcium