Using a doctor-blade method, a highly viscous titanium dioxide (TiO2) paste was deposited on a glass substrate coated with fluorine doped tin oxide (FTO). The paste was mainly composed of commercially available TiO2 nanoparticles (P25) and hydroxypropyl cellulose (HPC) as organic filler. Varying the content of HPC in the TiO2 paste changed the physical properties of the mesoporous TiO2 layer, particularly its porosity and surface area. From the quantification of dyes on Ti2, layer and the electrochemical impedance spectroscopy (EIS) study of the dye-sensitized solar cells (DSSCs), the surface area of the TiO2 film was found to have decreased. This came with the increase of HPC content while the porosity of the film increased, consistent with the concurrent decrease of short-circuit current density (Jsc) and efficiency (eta). The increased porosity greatly affected the electron transport through the TiO2 film by decreasing the coordination number of the TiO2 particles resulting to a decrease of the electron diffusion coefficient.