Advances in SAW gas sensors based on the condensate-adsorption effect

Sensors (Basel). 2011;11(12):11871-84. doi: 10.3390/s111211871. Epub 2011 Dec 20.

Abstract

A surface-acoustic-wave (SAW) gas sensor with a low detection limit and fast response for volatile organic compounds (VOCs) based on the condensate-adsorption effect detection is developed. In this sensor a gas chromatography (GC) column acts as the separator element and a dual-resonator oscillator acts as the detector element. Regarding the surface effective permittivity method, the response mechanism analysis, which relates the condensate-adsorption effect, is performed, leading to the sensor performance prediction prior to fabrication. New designs of SAW resonators, which act as feedback of the oscillator, are devised in order to decrease the insertion loss and to achieve single-mode control, resulting in superior frequency stability of the oscillator. Based on the new phase modulation approach, excellent short-term frequency stability (±3 Hz/s) is achieved with the SAW oscillator by using the 500 MHz dual-port resonator as feedback element. In a sensor experiment investigating formaldehyde detection, the implemented SAW gas sensor exhibits an excellent threshold detection limit as low as 0.38 pg.

Keywords: gas chromatography (GC); gas sensor; surface acoustic wave (SAW); threshold detection limit.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Adsorption
  • Chromatography, Gas
  • Gases*
  • Models, Theoretical
  • Volatile Organic Compounds / analysis

Substances

  • Gases
  • Volatile Organic Compounds