Design and experimental evaluation of adjustable bone plates for mandibular fracture fixation

Abstract

Conventional bone plates are commonly used for surgical mandibular fracture fixation. Improper alignment between bone segments, however, can result in malocclusion. Current methods of fixation require a surgeon to visually align segments of bone and affix a metal plate using bone screws, after which little can be done to adjust alignment. A method of adjusting fracture alignment after plate placement, without screw removal, presents an improvement over costly and risky revision surgery. A modified bone plate has been designed with a deformable section to give surgeons the ability to reduce misalignments at the fracture site. The mechanics of deformation for various adjustment mechanisms was explored analytically, numerically, and experimentally to ensure that the adjustable plate is comparable to conventional bone plates. A static force of 358.8 N is required to deform the adjustable bone plate, compared with predicted values of 351 N using numerical simulation and 362 N using a simple beam theory. Dynamic testing was performed to simulate in vivo loading conditions and evaluate load-capacity in both deformed and un-deformed bone plates. Results indicate that bending stiffness of a rectangular bone plate is 709 N/mm, compared with 174 N/mm for an octagonal plate and 176 N/mm for standard plates. Once deformed, the rectangular and octagonal plates had a stiffness of 323 N/mm and 228 N/mm, respectively. Un-deformed and deformed adjustable bone plates have efficacy in bone segment fixation and healing.