Wipe sampling is the USA regulatory protocol for determination of "dust lead loadings" in residential environments. Few studies have applied the wipe sampling method to metals other than lead (Pb) for the purpose of residential exposure assessments. This study was undertaken to develop and expand the wipe method for quantifying additional metal(loid)s including arsenic (As), cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), and antimony (Sb); and to provide information on typical background loadings for these metals in urban Canadian homes. A total of 932 wipe samples, 220 field blanks, and 220 duplicate wipes were collected from 222 homes located in three cities in Ontario, Canada using the ASTM 1728 standard. The wipes were digested using a modified version of the ASTM 1644 standard for Pb, which prescribes a hot nitric acid/hydrogen peroxide digestion. The key modification was the addition of hydrofluoric acid to improve recoveries of the target elements, and determination using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Generally, a large proportion of the results fell below the limits of detection (LOD) and quantification (LOQ). To distinguish "elevated" metal loadings from loadings characterized as "urban background", an upper background threshold for each element was derived using a normality (Q-Q) plot. LOQ was determined to be the appropriate minimum threshold based on quality assurance criteria. It is concluded that wipes are a useful sampling option to investigate multi-element loadings in residential environments.