The effect of chitosan as internal or external coating on the mesalamine (5-ASA) release from calcium alginate microparticles (CaAl) was studied, and a delayed release of 5-ASA system intended for colonic drug delivery was developed. The external chitosan coating was developed by immersion of wetted CaAl in chitosan solution and the internal coating by mixing 5-ASA with chitosan solution and drying before the preparation of CaAl. Both systems were coated with Acryl-EZE® using combined fluid bed coating and immersion procedure. The results showed that in phosphate medium (pH 7.5), chitosan as 5-ASA coating promotes a quick erosion process accelerating drug release, but chitosan as external coating (CaAlCS) does not increase the T (50) value compared with the microparticles without chitosan (CaAl). Chitosan as internal or external coating was not effective to avoid the quick 5-ASA release in acidic medium (pH 1.2). The presence of β-glucosidase enzymes increases significantly the 5-ASA release for CaAl, while no effect was observed with chitosan as internal or external coating. Fourier transform infrared spectroscopy, thermogravimetric analysis, and X-ray data revealed that 5-ASA did not form a solid solution but was dispersed in the microparticles. The Acryl-EZE® coating of microparticles was effective because all the formulations showed a low release, less than 15%, of 5-ASA in acid medium at pH 1.2. Significant differences in the percentage of 5-ASA released between formulations were observed in phosphate buffer at pH 6.0. In phosphate buffer at pH 7.2, all the formulations released 100% of 5-ASA.