Microstructural, optical, and electrical properties of SnO thin films prepared on quartz via a two-step method

ACS Appl Mater Interfaces. 2010 Apr;2(4):1060-5. doi: 10.1021/am900838z.

Abstract

A simple, cost-effective, two-step method was proposed for preparing single-phase SnO polycrystalline thin films on quartz. X-ray diffraction (XRD) analysis demonstrated that the annealed films were consisted of polycrystalline alpha-SnO phase without preferred orientation, and chemical composition analysis of the single phase in nature was analyzed using X-ray photoelectron spectroscopy (XPS). Transmittance spectra in UV-vis-IR range indicated that the average transmittance of both the as-deposited and the annealed SnO thin films was up to 70%. The optical band gap decreased from 3.20 to 2.77 eV after the annealing process, which was attributed to the crystalline size related quantum size effect. Photoluminescence (PL) spectrum of the annealed film showed only a weak peak at 585 nm, and no intrinsic optical transition emission was observed. Moreover, the p-type conductivity of SnO film was confirmed through Hall effect measurement, with Hall mobility of 1.4 cm(2) V(-1) s(-1) and hole concentration of 2.8 x 10(16) cm(-3).

Publication types

  • Research Support, Non-U.S. Gov't