Treatment of municipal landfill leachate using a combined anaerobic digester and activated sludge system

Waste Manag. 2010 Jun;30(6):1025-31. doi: 10.1016/j.wasman.2010.01.021. Epub 2010 Mar 2.

Abstract

The main objective of this study was to assess the feasibility of treating sanitary landfill leachate using a combined anaerobic and activated sludge system. A high-strength leachate from Shiraz municipal landfill site was treated using this system. A two-stage laboratory-scale anaerobic digester under mesophilic conditions and an activated sludge unit were used. Landfill leachate composition and characteristics varied considerably during 8 months experiment (COD concentrations of 48,552-62,150 mg/L). It was found that the system could reduce the COD of the leachate by 94% at a loading rate of 2.25g COD/L/d and 93% at loading rate of 3.37g COD/L/d. The anaerobic digester treatment was quite effective in removing Fe, Cu, Mn, and Ni. However, in the case of Zn, removal efficiency was about 50%. For the rest of the HMs the removal efficiencies were in the range 88.8-99.9%. Ammonia reduction did not occur in anaerobic digesters. Anaerobic reactors increased alkalinity about 3.2-4.8% in the 1st digester and 1.8-7.9% in the 2nd digester. In activated sludge unit, alkalinity and ammonia removal efficiency were 49-60% and 48.6-64.7%, respectively. Methane production rate was in the range of 0.02-0.04, 0.04-0.07, and 0.02-0.04 L/g COD(rem) for the 1st digester, the 2nd digester, and combination of both digesters, respectively; the methane content of the biogas varied between 60% and 63%.

MeSH terms

  • Bacteria, Anaerobic
  • Biofuels
  • Environmental Pollution / prevention & control
  • Metals, Heavy / analysis
  • Methane / analysis
  • Oxygen / metabolism
  • Sewage*
  • Water Pollutants, Chemical / metabolism*

Substances

  • Biofuels
  • Metals, Heavy
  • Sewage
  • Water Pollutants, Chemical
  • Methane
  • Oxygen