Many cooking utensils are made of nylon, a material that may incorporate azodyes and where primary aromatic amines (PAAs) are the starting substances. Moreover, aromatic amines may also be present as technical impurities. Another source of PAAs could be aromatic isocyanates used as monomers in the production of polyurethanes. The aim of this work was to validate a simple LC-MS/MS method for the determination of eight primary aromatic amines (m-phenylenediamine, 2,6- and 2,4-toluenediamine, 1,5-diaminonaphthalene, aniline, 4,4'-diaminonaphenylether, 4,4'-methylenedianiline and 3,3'-dimethylbenzidine) in the aqueous food simulant 3% acetic acid (w/v). The detection limits calculated were adequate with respect to present legislation. The method was validated at four concentration levels (2, 5 10 and 20 microg kg(-1)). Global internal reproducibility was in the range 5.6-21.4% (RSD(R)) depending on the compound and concentration. Mean recoveries for all levels varied between 89 and 100%, depending on the amine. A total of 39 samples of cooking utensils were analyzed using the described method and the results obtained after the third migration test were not compliant in approximately half of the samples.