Adsorption of acids and bases from aqueous solutions onto silicon dioxide particles

J Hazard Mater. 2009 Dec 30;172(2-3):978-85. doi: 10.1016/j.jhazmat.2009.07.088. Epub 2009 Jul 29.

Abstract

The adsorption of acids and bases onto the surface of silicon dioxide (SiO(2)) particles was systematically studied as a function of several variables, including activation conditions, contact time, specific surface area, particle size, concentration and temperature. The physical properties of SiO(2) particles were investigated, where characterizations were carried out by FT-IR spectroscopy, and morphology was examined by scanning electron microscopy (SEM). The SEM of samples showed good dispersion and uniform SiO(2) particles with an average diameter of about 1-1.5 microm. The adsorption results revealed that SiO(2) surfaces possessed effective interactions with acids and bases, and greatest adsorption capacity was achieved with NaOH, where the best fit isotherm model was the Freundlich adsorption model. The adsorption properties of raw SiO(2) particles were further improved by ultrasonication. Langmuir monolayer adsorption capacity of NaOH adsorbate at 25 degrees C on sonicated SiO(2) (182.6 mg/g) was found to be greater than that of the unsonicated SiO(2) (154.3mg/g). The spontaneity of the adsorption process was established by decreases in DeltaG(ads)(0), which varied from -10.5 to -13.6 kJ mol(-1), in the temperature range 283-338K.

Publication types

  • Research Support, Non-U.S. Gov't

MeSH terms

  • Acids / isolation & purification*
  • Adsorption
  • Alkalies / isolation & purification*
  • Silicon Dioxide / chemistry*
  • Sodium Hydroxide
  • Solutions
  • Temperature
  • Water

Substances

  • Acids
  • Alkalies
  • Solutions
  • Water
  • Sodium Hydroxide
  • Silicon Dioxide