The stiffness as well as the biodegradation rate of collagen and gelatine products can be modulated by performing a number of crosslinking treatments. In many biomedical applications, an optimal degree of crosslinking seems to exist, depending on the mechanical and/or biosynthesis properties of the host site. The aim of this study was to evaluate the optimal degree of crosslinking of collagen and gelatine films, to be used as sealants for vascular prostheses. Various crosslinking treatments, including exposure to aldehydes, dehydrothemal treatment, carbodiimide crosslinking and combinations of them, were performed on collagen and gelatine films, and the resulting increases in stiffness, degree of crosslinking and denaturation temperature were evaluated. Analogue crosslinking treatments were also performed on sealed prostheses, which were then tested for blood leakage. The experimental results showed that a good blood impermeability of both collagen and gelatine films was obtained for crosslinking density of about 1.2-1.3 x 10(-5) mol/cm(3), which could be yielded by a dehydrothermal crosslinking treatment (DHT). In particular, dehydrothermally treated gelatine-coated prostheses were found to perform better than analogue collagen-coated ones. The presence of glycerol in crosslinked collagen films was found to have plasticizing effects, which are likely to facilitate blood impermeability, and to increase the thermal stability of collagen.